product datasheet regina series last update 19/5/2016 product number family type led color diameter height style optic material holder material fastening status c11347_regina regina reflector xp-g metal 19 mm 15.3 mm round pc - ["pin", "glue"] production ready fwhm efficiency cd/lm gerber file 10 degrees 86 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet regina series last update 19/5/2016 general information - product series especially designed & optimized for xp-g series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (short term 100 degrees of celcius / 212 degrees of fahrenheit). september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 0% 25% 50% 75% 100% -20 -15 -10 -5 0 5 10 15 20 relative intensity of c11347_regina - re - es 0 % 25 % 50 % 75 % 100 % -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 relative intensity of c11347_regina - xp - g a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class m, otherwise class c. according to din iso 2768-2 form and position: class l scale 1:1 weight sheet size drawing title part number ledil oy salorankatu 10 fin 24240 salo finland third angle projection: a4 1/1 this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy. 0,8 g c11347 c11347_regina index part no description material colour 1 c11347 regina pc metal 15.3 2.5 1 front view 19 2 8.6 9.4 bottom view isometric view scale: 1:1
product datasheet regina series last update 19/5/2016 product number family type led color diameter height style optic material holder material fastening status c11347_regina regina reflector xp-g metal 19 mm 15.3 mm round pc - ["pin", "glue"] production ready fwhm efficiency cd/lm gerber file 10 degrees 86 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet regina series last update 19/5/2016 general information - product series especially designed & optimized for xp-g series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (short term 100 degrees of celcius / 212 degrees of fahrenheit). september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 0% 25% 50% 75% 100% -20 -15 -10 -5 0 5 10 15 20 relative intensity of c11347_regina - re - es 0 % 25 % 50 % 75 % 100 % -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 relative intensity of c11347_regina - xp - g a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class m, otherwise class c. according to din iso 2768-2 form and position: class l scale 1:1 weight sheet size drawing title part number ledil oy salorankatu 10 fin 24240 salo finland third angle projection: a4 1/1 this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy. 0,8 g c11347 c11347_regina index part no description material colour 1 c11347 regina pc metal 15.3 2.5 1 front view 19 2 8.6 9.4 bottom view isometric view scale: 1:1
product datasheet regina series last update 19/5/2016 product number family type led color diameter height style optic material holder material fastening status c11347_regina regina reflector xp-g metal 19 mm 15.3 mm round pc - ["pin", "glue"] production ready fwhm efficiency cd/lm gerber file 10 degrees 86 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet regina series last update 19/5/2016 general information - product series especially designed & optimized for xp-g series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (short term 100 degrees of celcius / 212 degrees of fahrenheit). september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 0% 25% 50% 75% 100% -20 -15 -10 -5 0 5 10 15 20 relative intensity of c11347_regina - re - es 0 % 25 % 50 % 75 % 100 % -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 relative intensity of c11347_regina - xp - g a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class m, otherwise class c. according to din iso 2768-2 form and position: class l scale 1:1 weight sheet size drawing title part number ledil oy salorankatu 10 fin 24240 salo finland third angle projection: a4 1/1 this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy. 0,8 g c11347 c11347_regina index part no description material colour 1 c11347 regina pc metal 15.3 2.5 1 front view 19 2 8.6 9.4 bottom view isometric view scale: 1:1
product datasheet regina series last update 19/5/2016 product number family type led color diameter height style optic material holder material fastening status c11347_regina regina reflector xp-g metal 19 mm 15.3 mm round pc - ["pin", "glue"] production ready fwhm efficiency cd/lm gerber file 10 degrees 86 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet regina series last update 19/5/2016 general information - product series especially designed & optimized for xp-g series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (short term 100 degrees of celcius / 212 degrees of fahrenheit). september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 0% 25% 50% 75% 100% -20 -15 -10 -5 0 5 10 15 20 relative intensity of c11347_regina - re - es 0 % 25 % 50 % 75 % 100 % -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 relative intensity of c11347_regina - xp - g a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class m, otherwise class c. according to din iso 2768-2 form and position: class l scale 1:1 weight sheet size drawing title part number ledil oy salorankatu 10 fin 24240 salo finland third angle projection: a4 1/1 this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy. 0,8 g c11347 c11347_regina index part no description material colour 1 c11347 regina pc metal 15.3 2.5 1 front view 19 2 8.6 9.4 bottom view isometric view scale: 1:1
product datasheet regina series last update 19/5/2016 product number family type led color diameter height style optic material holder material fastening status c11347_regina regina reflector xp-g metal 19 mm 15.3 mm round pc - ["pin", "glue"] production ready fwhm efficiency cd/lm gerber file 10 degrees 86 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet regina series last update 19/5/2016 general information - product series especially designed & optimized for xp-g series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (short term 100 degrees of celcius / 212 degrees of fahrenheit). september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 0% 25% 50% 75% 100% -20 -15 -10 -5 0 5 10 15 20 relative intensity of c11347_regina - re - es 0 % 25 % 50 % 75 % 100 % -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 relative intensity of c11347_regina - xp - g a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class m, otherwise class c. according to din iso 2768-2 form and position: class l scale 1:1 weight sheet size drawing title part number ledil oy salorankatu 10 fin 24240 salo finland third angle projection: a4 1/1 this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy. 0,8 g c11347 c11347_regina index part no description material colour 1 c11347 regina pc metal 15.3 2.5 1 front view 19 2 8.6 9.4 bottom view isometric view scale: 1:1
product datasheet regina series last update 19/5/2016 product number family type led color diameter height style optic material holder material fastening status c11347_regina regina reflector xp-g metal 19 mm 15.3 mm round pc - ["pin", "glue"] production ready fwhm efficiency cd/lm gerber file 10 degrees 86 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet regina series last update 19/5/2016 general information - product series especially designed & optimized for xp-g series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (short term 100 degrees of celcius / 212 degrees of fahrenheit). september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 0% 25% 50% 75% 100% -20 -15 -10 -5 0 5 10 15 20 relative intensity of c11347_regina - re - es 0 % 25 % 50 % 75 % 100 % -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 relative intensity of c11347_regina - xp - g a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class m, otherwise class c. according to din iso 2768-2 form and position: class l scale 1:1 weight sheet size drawing title part number ledil oy salorankatu 10 fin 24240 salo finland third angle projection: a4 1/1 this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy. 0,8 g c11347 c11347_regina index part no description material colour 1 c11347 regina pc metal 15.3 2.5 1 front view 19 2 8.6 9.4 bottom view isometric view scale: 1:1
product datasheet regina series last update 19/5/2016 product number family type led color diameter height style optic material holder material fastening status c11347_regina regina reflector xp-g metal 19 mm 15.3 mm round pc - ["pin", "glue"] production ready fwhm efficiency cd/lm gerber file 10 degrees 86 % - available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet regina series last update 19/5/2016 general information - product series especially designed & optimized for xp-g series of leds. - special care taken to make light distribution as uniform as possible. - reflector is made of aluminium coated pc (120 degrees of celcius / 248 degrees of fahrenheit) with protective lacquer (short term 100 degrees of celcius / 212 degrees of fahrenheit). september 21st 2017 7:33 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 0% 25% 50% 75% 100% -20 -15 -10 -5 0 5 10 15 20 relative intensity of c11347_regina - re - es 0 % 25 % 50 % 75 % 100 % -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 relative intensity of c11347_regina - xp - g a d b c a d 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class m, otherwise class c. according to din iso 2768-2 form and position: class l scale 1:1 weight sheet size drawing title part number ledil oy salorankatu 10 fin 24240 salo finland third angle projection: a4 1/1 this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy. 0,8 g c11347 c11347_regina index part no description material colour 1 c11347 regina pc metal 15.3 2.5 1 front view 19 2 8.6 9.4 bottom view isometric view scale: 1:1
|
